ML-01 Si-Pyranometer

  • ISO 9060:2018 Class C
  • Sub-category "Fast response"
  • Same spectral response as a PV module
  • Accurate solution for PV performance ratio monitoring
  • Low temperature dependency
  • Fast response photodiode detector
  • Industrial grade Si-pyranometer with removable mounting plate
Ask for quotation

The ML-01 Si-sensor complies to ISO 9060:2018 Class C. The ML-01 Si-sensor can be categorized between the reference cell and broadband thermopile pyranometer. Compared to the reference sensors it has a proper cosine response and it is relatively compact, but benefits from the same characteristics as a PV module (Response time, Spectral and Temperature response). The ML-01 is an industrial grade solar sensor specially made for Performance ratio measurements as well as irradiance measurement applications for the meteorological, agricultural and environmental studies. The compact dimensions of the sensor body make it easy to integrate it within any application using it with or without a mounting plate. For global horizontal measurement applications, the sensor can be mounted in the horizontal position ...

Read more
  Specifications ML-01
  ISO 9060:2018 Class C
  ISO 9060:1990 Not compliant
  Sub-category "Spectrally flat" Not compliant
  Sub-category "Fast response" Compliant
  Output Analog (mV)
Response time 95% < 1 ms
Zero off-set a) 200W/m² 0 W/m²
Zero off-set b) 5K/hr 0 W/m²
Complete zero off-set c) 0 W/m²
  Non-stability change/1 year +/- 2 %
Non-linearity at 1000W/m² < 0.2 %
Directional response at 1000W/m² < 10 W/m²
Spectral error +/- 3.07 %
Temperature response -10°C + 40°C < 0.15 %/°C
Tilt response 0 %
Sensitivity Approx. 50 µV/W/m²
  Impedance 50 Ω
Wavelength range 400 - 1100 nm
  Operating temperature range -30 - 70 °C
Irradiance range 0 - 2000 W/m²
  Cable length 5 m
  Options

Compare:

ML-02

Applications and uses

The accurate solar radiation measurements and the reliable driving require a little knowledge and attention: think about environmental influences (wind, rain/snow, soiling), re-calibration (bi-annual), without mentioning data processing, spectral effects, ...

More information

Weathering of materials is most often an irreversible process affecting the cosmetic properties or strength of materials. This aging process is mainly driven by UV radiation, Heat and reactive elements ...

More information
View all