MF-190 Heat flux sensor

  • Thinnest heatflux sensor on the market
  • Large area sensor 
  • Low thermal resistance
Ask for quotation

The MP-190 is a large area (310 x 310mm) flexible thin foil heat flow sensor. It can be easily rolled on a curved surface and attached to large surface areas. Due to its large sizes it gives properly averaged thermal conductivity results for large areas without the potential risk of measuring local hot spot effects or thermal bridges.    

For the measurement of:

  • Evaluation of floor heating Research on heating efficiency of various lamps and other light sources
  • Investigation of the heating efficiency of drying machines, heating systems, etc.
  • Measurement of radiative heating and heating absorption of various parts of an automobile
  • Research of radiative heating of various plants

The low output Voltage of the heat flow sensor can be easily ...

Read more
  Specifications MF-190
Response time 95% 28 Sec.
Sensitivity Approx. 200 µV/W/m²
Thermal resistance Approx. 0.003 m2°C/W
Impedance 600 - 900 Ω
  Operating temperature range -30 - 120 °C
  Cable length 10 m
  Dimensions (mm) 310 (L) x 310 (W) x 0.7 (H)
Weight 0.1 kg
  Ingress protection IP -
  Substrate Glass epoxy
  Cladding Polyester
  Options

Compare:

MF-180
MF-180M
MF-200

Applications and uses

Understanding of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating systems. Thermal conductivity can be improved when for multilayer constructions materials are optimized ...

More information

The construction building wall makes the most significant contribution to the reduction of building energy consumption. The total thermal losses of building constructions strongly depends on the environmental conditions (Location ...

More information