MF-180M Heat flux sensor

  • Waterproof and durable design
  • Teflon substrate heatflux sensor
  • Small size and profile
  • Calibration complies with JIS A 1412
Ask for quotation

Similar to the MF-180 but waterproof and durable design for soil heat flow measurement. All sensors are extremely flat, which is a big advantage considering the minimum interference with the conditions of the testing area the thermal dynamics. The low output Voltage of the heat flow sensor can be easily converted to a 4-20mA current or higher Voltage using the MS-4..20mA converter. The mV/mA converter can be pre-programmed and optimized within the operating range compatible with common measurement equipment.

Read more
  Specifications MF-180M
Response time 95% 13 Sec.
Sensitivity Approx. 25 µV/W/m²
Thermal resistance Approx. 0.0015 m2°C/W
Impedance 150 - 550 Ω
  Operating temperature range -20 - 120 °C
  Cable length 10 m
  Dimensions mm 50 (L) x 25 (W) x 1.2 (H)
Weight 0.001 kg
  Ingress protection IP 65
  Substrate Teflon
  Cladding Carbon FRP
  Cable length 10 m
  Options

Applications and uses

Understanding of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating systems. Thermal conductivity can be improved when for multilayer constructions materials are optimized ...

More information

The construction building wall makes the most significant contribution to the reduction of building energy consumption. The total thermal losses of building constructions strongly depends on the environmental conditions (Location ...

More information