MF-180 Heat flux sensor

  • Thin heatflux sensor
  • High sensitivity
  • Small size
  • Calibration complies with JIS A 1412
Ask for quotation

The MF-180 has a high sensitivity, small size suitable to measure low heat flow values. Heatflux sensors can be used in a variety of research applications and manufacturing control processes. EKO has various types of thin substrate heat flux sensorsin the product line-up. A heatflux sensor is a thermopile sensor which generates an electric signal proportional to the ∆T across the thermocouple hot and cold junctions. To generate a measurable voltage heat flux sensor have a multiple of thermocouples spread over the total area and connected in series. EKO heatflux sensor are available in different sizes and thickness.

Read more
  Specifications MF-180
Response time 95% 25 Sec.
Sensitivity Approx. 28 µV/W/m²
Thermal resistance Approx. 0.0014 m2°C/W
Impedance 150 - 550 Ω
  Operating temperature range -30 - 120 °C
  Cable length 10 m
  Dimensions (mm) 40 (L) x 20 (W) x 0.9 (H)
Weight 0.0011 kg
  Ingress protection IP -
  Substrate Teflon
  Cladding Polyester
  Options

Compare:

MF-180M
MF-190
MF-200

Applications and uses

Understanding of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating systems. Thermal conductivity can be improved when for multilayer constructions materials are optimized ...

More information

The construction building wall makes the most significant contribution to the reduction of building energy consumption. The total thermal losses of building constructions strongly depends on the environmental conditions (Location ...

More information