HF-30S Heat flux sensor

  • Thinnest heatflux sensor on the market
  • Large area sensor
  • Low thermal resistance
  • Weather proof
Ask for quotation

The HF-30S is a large area (300 x 300mm) fthin foil heat flow sensor. Due to its large sizes it gives properly averaged thermal conductivity results for large areas without the potential risk of measuring local hot spot effects or thermal bridges.    

The low output Voltage of the heat flow sensor can be easily converted to a 4-20mA current or higher Voltage using the MS-4..20mA converter. The mV/mA converter can be pre-programmed and optimized within the operating range compatible with common measurement equipment.     

 

Read more
  Specifications HF-30S
Response time 95% 28 Sec.
Sensitivity Approx. 100 µV/W/m²
Thermal resistance Approx. 0.0016 m2°C/W
Impedance 400 - 800 Ω
  Operating temperature range -30 - 120 °C
  Cable length 10 m
  Dimensions mm 300 (L) x 300 (W) x 0.5 (H)
Weight 0.12 kg
  Ingress protection IP -
  Substrate Glass epoxy
  Cladding Epoxy
  Options

Applications and uses

Understanding of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating systems. Thermal conductivity can be improved when for multilayer constructions materials are optimized ...

More information

The construction building wall makes the most significant contribution to the reduction of building energy consumption. The total thermal losses of building constructions strongly depends on the environmental conditions (Location ...

More information