• EKO International
  • EKO Japan
  • EKO Spain
Environmental measurement & analysis
EKO Instruments - clouds header

MS-56 Pyrheliometer

MS-56 Pyrheliometer

Features

  • ISO 9060 First Class Pyrheliometer
  • Ultra fast < 1 s response detector to detect quick radiation changes due to clouds and aerosols
  • Excellent temperature stability and temperature compensation to be used in a wide temperature range
  • Outdoors calibration under real solar conditions
  • Double temperature sensor (PT-100 / YSI 44031 10kΩ)
  • Efficient window heater to prevent dew and frost (0.3W)

The ISO First Class MS-56 is a direct normal incidence (DNI) solar irradiance sensor. Also known as a pyrheliometer, it is used as a reference sensor for routine operation on a Solar Tracker. The all-weather MS-56 is sensitive to solar irradiance in the spectral range 200 – 4000nm and works under the most extreme conditions in a temperature range from -40°C...+80°C.

The versatile MS-56 combines all features of a quick broadband detector enabled by an advanced technology thermopile detector. It combines a unique fast response time (<1s 95%), high sensitivity, excellent thermal stability and very low temperature coefficient to make it hardly immune to ambient temperature variations, therefore it is suitable to be used in a wide temperature range. The MS-56 has a standard full 5° (degrees) opening angle and 1° slope angle as defined by ISO Pyrheliometers Standards and greatly performs when used in combination with the EKO STR-21(G) or STR-22(G) Sun Tracker. The standard built-in thermistor (44031 10kΩ) or platinum resistance temperature sensor (Pt100) can be used as a temperature reference for extensive research purposes.

The integrated low power window heater prevents dew deposition or frost on the outside window. The MS-56 has a robust but compact and smooth design which forms the new generation of EKO Instruments solar radiometers that are designed for most demanding Photovoltaic and Meteorological applications at any place on earth. Each MS-56 is calibrated and tested at EKO upon manufacture against EKO’s reference sensors which are fully traceable to the WRR (World Radiometric Reference) maintained at the PMOD/WRC (Physikalisch-Meteorologisches Observatorium Davos/World Radiation Center) in Davos, Switzerland.

Specifications

Specifications (Typical) MS-56
ISO 9060 classification First Class
Response time 95% < 1 s
Zero offset - Temperature change (5K/hr) < 1 W/m²
Non-stability (change/year) < 0.5 %
Non-linearity (100 -1000W/m²) < 0.5 %
Spectral selectivity (0.35-1.5µm) < 1 %
Temp. dependency (-20°C to 50ºC / @ 20°C) < 0.5 %
Tilt response (at 1000W/m²) < 0.2 %
Sensitivity (µV/W/m²) Approx. 10
Impedance (Ω) Approx. 5000
Operating temperature range (°C) - 40 to +80
Cable length 10m
Spectral range (> 50% transmittance) 200 to 4000 nm

Images

Downloads

Related products